- Submit an enquiry to a product.
- Wait for a call from nearest supplier from your area.
- Get quote and product details.
- Choose best from them.
Product Description
Kisan Rigid uPVC Pipes are made of highest grade quality resin which ensures the fulfillment of the basic need for clean and hygienic water. They are made on the latest, state-of-the-art plants in India.
It comes in 3 variants - Plain Pipes, Socketed Pipes & Elastomeric Ring fit pipes, branded as Kisan Firmseal. These pipes are manufactured as per IS 4985 : 2000.
Our pipes have a life span of over 50 years if laid & buried below the ground as per prescribed standards.
Plain Pipe
Plain end pipes are supplied with one coupler for Solvent Cement Joining as per lay & joining standards.
Socketed Pipes
Kisan Self socketed pipes have one end self socketed and other end plain. It joins with the help of Solvent Cement.
Firmseal (Ringfit) Pipes:
Brief Description:
Kisan Firmseal Pipes comes with Electrometric Sealing ring which enhances the uPVC system joining specially in higher diameter pipes from 140mm - 400mm OD. Rubber sealing rings ensures the leak proof joints and easy installation. Can withstand the pressure beyond the specified testing pressure for pipes.
Features:
- Corrosion Resistant : Immune to galvanic or electrolytic erosion
- Chemical and Biological Resistant : Resistant to acids, oxidizing agents, alkalis, oils and domestic effluents. Fit for high purity water applications
- Easy Installation : Pipes of diameter less than 140 mm can be joined by hand pressure while for those of a larger diameter, a pipe jack is adequate
- Lower cost of Installation : Lightweight therefore they are easy to transport and carry to the site
- Flexibility :Can accommodate slight shifting of the soil, bending of the pipe up to 2 degrees per joint and tolerates small gradients in underground piping
- Immediate Testing : Pipes can be tested for ability to withstand pressure immediately on completion of installation. There is no need to wait for the joints to dry, etc.
- Maintenance Free : No painting or coating required
- Seal Rings (only for Firmseal): The rings are in accordance with IS : 5382.
- It has been designed in such a way that the pipes can be installed with extreme ease & convenience & it does not require any Solvent Cement or Sealants for joining. It absorbs linear expansion, leaving the seal intact, even under extreme temperature variations. The Ring is not affected by ultraviolet radiations, bacteria, fungus or termites. Also, it is resistant to salt water, organic vegetable oils, dilute acids, dilute alkalis, aqueous chlorine and other pollutants found in typical sewage and waste water.
Specification:
Nominal Outside Diameter (nominal size)(mm.) | Mean Outside Diameter (mm.) | Outside Diameter at any point (mm.) | Working Pressure / Wall thickness | |||||
Class 1 0.25 Mpa2 2.5 kgf/cm2 | Class 2 0.40 Mpa2 4.0 kgf/cm2 | Class 3 0.60 Mpa2 6.0 kgf/cm2 | Class 4 0.80 Mpa2 8.0 kgf/cm2 | Class 5 1.00 Mpa2 10.0 kgf/cm2 | Class 6 1.25 Mpa2 12.5 kgf/cm2 | |||
MinMax | Min Max | Min Max | Min Max | Min Max | Min Max | Min Max | Min Max | |
20 | 20.0 20.3 | 19.5 20.5 | - | - | - | - | 1.1 1.5 | 1.4 1.8 |