Battery Charger by Vetus & Maxwell Marine India Private Limited

VETUS batttery chargers meet all requirements of daily use.• They are suitable for connection to 120 or 230 Volts AC mains supply.• Even at very low voltage, these chargers are fully operational: 80 Volts (instead of the usual 120 V) or 180 Volts (instead of the normal 230 V).• All VETUS battery chargers – with the exception of the smallest model BC12202A – feature three outputs, allowing simultaneous charging of up to three banks of batteries (model BC12202A has 2 outputs).• VETUS battery chargers are three-phase chargers: normal, boost and float.• The charging characteristic can be adjusted for wet, gel filled, semi-traction or AGM (absorbed glass mat) batteries.• Protection is built in for: Output terminal short-circuit, high or low input voltage, excessively high battery voltage and charger temperature.• Polarity reversal is indicated by a warning LED and alarm buzzer.• These VETUS battery chargers are high quality, thus ensuring the longest possible battery life span.• They may stay switched on permanently, even over the winter.• All VETUS battery chargers have the optimum “IUoU” charging characteristic, with a “float phase”. With this characteristic, the charger reduces the output boost current when the so called “gas voltage” is reached. In the final charging phase, it reduces the charging current even further until the float voltage is reached, thus preventing the battery from gassing and consuming water.

Specifications :
Dimensions of the panel : 99 X 62.5 MM
Cut Out Dimensions : 70 X 52 MM

Type	BC12202A	BC12263A	BC12403A	BC12603A	BC12803A	BC24303A	BC24503A	BC24803A
Supply voltage	80-130 V or 180-250 V, internally adjustable
Frequency	50 or 60 Hz
Power consumption	300 W	400 W	600 W	900 W	1200 W	900 W	1500 W	2400 W
Number of Outlets	2	3
Protection Level	IP20
Dimesions (MM)	293x180x95	293x180x95	246x305x90	340x300x90	340x300x90	246x305x90	340x300x90	340x289x181