Brine Refrigeration Experimental Equipment by Edutek Instrumentation

Brine Refrigeration Experimental Equipment   EDI-205

Some of the Features of our Brine Refrigeration Experimental Equipment are:-

1. Cycle composition: Compressor - Condenser - Receiver - Filter dryer - Sight glass - Solenoid V/V 1 - Manual expansion V/V - Evaporator (Brine tank with pump) - Solenoid V/V 2 - Accumulator - Compressor.
2. Being practicable to measure temperature at each of compressor inlet and outlet, condenser inlet and outlet, expansion V/V inlet and outlet, evaporator outlet, inside chamber, and outside using thermo couples of T-type, and of pressure: Being practicable to measure within the range of -1bar ~ 35bar at each of compressor inlet and outlet, condenser outlet, expansion V/V outlet, and evaporator inlet by pressure sensors which are installed.
3. Saving of data in every sec or min by excel program of MICROSOFT on
computer.
4. Experiment factors: Being practicable to calculate each factor of like as refrigeration effect, compressor work, condensing effect, evaporating latent heat, amount of flash gas at expansion V/V outlet, dry rate and humidity at expansion V/V outlet, and coefficient of performance in the abstract with temperature and pressure data which are measure.

SPECIFICATION:-

Mechanical refrigeration part
- Compressor: 1HP, for R-22
- Condenser and Fan motor: 1HP, Air cooling,
- Evaporator (Transparent acrylic, Brine Chamber), L400 W300 H460 mm
- Ice maker: copper cylinder 9EA / - Brine Pump: AC 220V 60Hz, 30W
- Whole size: L1570mm W800mm  H1420mm