Deep Well Submersible Pump By Kanis Pumps And Cable

Featured Suppliers

How it works

Submit an enquiry to a product.
Wait for a call from nearest supplier from your area.
Get quote and product details.
Choose best from them.

Recently Added Suppliers

Product Description

Specification :	Single Phase	Three Phase
Power Range & Version	0.5 HP – 3 HP	0.5 HP to 6 HP
Version	220-240V, A.C., 50 Hz	415 V, 50 Hz
Speed	2880 rpm.	2880 RPM
Flow Rate	10 lpm to 300 lpm. / 0.6 m3H â€“ 18 m3H	100 lpm to 300 lpm / 0.6 m3H â€“ 18 m3H
Total Head Range	10 m to 195 m	10 m to 230 m
Outlet size in inches / mm	1” , 1¼”, 1½”, 2″, / 25, 32, 40 & 50 mm	1” , 1¼”, 1½”, 2″, 25, 32, 40 & 50 mm
Degree of Protection	IP 68	IP 68
Direction of Rotation	CCW – 1Ph & CCW-CW	CCW
Maximum Outer diameter	98 mm	98 mm
Type of Duty	S1 (Continuous)	S1 (Continuous)
Maximum cooling flow	0.15 m/sec.	0.15 m/sec.
Maximum starts per hour	12 times.	12 times.
Method of starting	Capacitor start and run (CSR) – 1 Ph.	DOL (Direct on line)
Material of Construction – Pump
Part Name	Material SS Pump
Check valve Housing	S.S. 304
Check Valve	S.S. 304
Impeller	S.S. 304
Diffuser	S.S. 304
Pump Shell / Clump (S.S. Pump)	S.S. 304
Pump Shaft	S.S. 410 / 431
Suction inter Connector	S.S. 304
Coupling	S.S. 304
Material of Construction – Motor
Part Name	Material SS Motor
Upper, Lower Housing & Motor Base	S.S. 304 / CI
Stator Shell	S.S. 304 / J-4
Shaft	S.S. 410 / 431
Bearing	Ball Bearing
Mechanical Seal	Carbon / Ceramic
Pump Liquids : Clean, thin, non-aggressive, non-explosive, clear, cold, fresh water without abrasives, solid particle or fibers shall mean the water having the following characteristics.
Temperature	33°C (max.)
Permissible amount of sand	25 gms /m3 (max.)
Chlorine ion density	500 ppm (max.)
Allowable solids	3000 ppm (max.)
Specific gravity	1.004 (max.)
Hardness (drinking water)	300 ppm (max.)
Viscosity	1.75 x 106 m2 /sec (max.)
Turbidity	50 ppm silica scale(max.)
pH value	6.5 to 8.5.