Kirloskar Solid Handling Non Clog Pumps

Featured Suppliers

How it works

Submit an enquiry to a product.
Wait for a call from nearest supplier from your area.
Get quote and product details.
Choose best from them.

Recently Added Suppliers

Product Description

Our company supplies a wide range of solid handling non clog pumps in types of SHM, SHS and SHV manufactured by Kirloskar. These pumps are available in delivery size up to 200 mm with the capacity up to 800 m3/hr and head up to 90 m. These can be offered in maximum permissible solid size up to 105 mm as per the model with standard consistency up to 5% and QP impellers for more than 5% consistency.

Applications:

For handling liquids with solids in suspension
Sludge or pulpy material in paper Industries
Sewage or waste with soft solids in suspension
Viscous liquids or liquids carrying fibrous material or powdered material slurries
Contaminated process liquids like sugar factory waste
Trade liquors
Water carrying gravel

Constructional Features:

SHM are horizontal non clog pumps having single stage, single suction with back pull out type design
SHS are vertical non-clog pumps for wet pit applications
The pump unit is suspended by a column pipe that also protects the transmission shaft
Our pumps in this range can be offered with a column length up to 6.5 m.
SHV are vertical non clog pumps for dry pit application in vertical orientation to be driven by vertical flange mounted motor that is directly coupled
SHVT pumps are vertical non clog pumps for dry pit application in vertical orientation to be driven by vertical flange mounted motor but coupled through transmission shafting
The pumps operate at 50 Hz and 60 Hz

Specifications of the components of the pump are as following:

Casing: End suction with top centre line delivery as well as horizontal side delivery. High efficiency volute providing smooth unobstructed flow. Delivery flange and feet are cast integral with the casing. A large inspection opening is provided on casing with easily removable cover.
Impeller: Single suction type non clog impeller dynamically balanced. Enclosed or semi-open impellers are available in code N, P, Q or R.
Shaft: In SHM pumps, four driving units cover the entire range. Shaft is supported by two bearings. Shaft in stuffing box area is protected by a shaft sleeve. Axial clearance between semi-open impeller and suction wear plate can be adjusted externally without dismantling the pump. The shaft sleeves under bearing housing and bearing spider are shrunk fitted to shaft in SHS pumps.
Stuffing Box: Standard stuffing box is gland packed with grease sealing. Without cooling up to 90 0C and with cooling up to 140 0C. Mechanical seal option is also available.

Bearings for SHM Pumps

Standard: Deep groove ball bearings at DE/NDE.

Optional:

Deep groove ball bearing at DE and roller bearing at NDE.
A pair of angular contact ball bearings (BECB) at DE & one cylindrical roller bearing at NDE.
Standard lubrication is grease and optional is oil.

Bearing for SHS Pumps: Intermediate shaft bearing is rubber (For water Lubrication) and bronze bearing (For grease lubrication). Thrust ball bearing in combination with metallic journal bearing at head shaft. Transmission bearings are lubricated with external clear water or grease.

Thrust bearings are grease lubricated.

Direction of Rotation: Clockwise viewed from driving end
Drive: These pumps are suitable for coupling with electric motor or engine directly or through belt drives

Flanges: