Lacquer Curing Heating Oven by Cosmic Connection

We offers an extensive range of Industrial Lacquer Curing Ovens for curing lacquer before and after metallising on glass, plastic and metal articles. These ovens are specially designed for Vacuum Metallising Industry and comprehensively engineered to incorporate the latest features.

Features :

• Digital Temperature Indicator cum Controller
• Digital Timer, 0-999 minutes
• Heaters - standard 1000 W rating, strip type
• Switches, latching type with illuminating front
• Fan Motors – Direct Drive type
• Inter locking for safe operation

DESIGN

COSMIC series - LCO ovens can be used in various industries but these ovens are specially designed to be used in Vacuum Metallising Industry for curing base-coat and top-coat of lacquer on glass, plastic and metallic articles.

COSMIC series-LCO ovens are double walled with inner and outer shells made of thick mild-steel sheet. The outer boundaries are protected with angle-iron structure and reinforced with thick mild-steel strips. The gap of two shells is filled with best quality mineral wool for proper insulation to reduce the heat loss through the body. Strip type heaters, 1000 W, of best quality suitable for continuous 24 hours operation are provided on both sides of oven. Each heating element is independent and can be easily replaced in the event of damage/ failure. Forced air circulation is provided with suitable number of fans in the inner working space, which are driven by a Direct Drive, 1/2 H.P., 2880 RPM motor fixed outside the oven. Circular opening is provided at the top of the oven to exhaust the fumes, out of the working area, produced by the lacquers. Temperature of the oven is controlled by a digital temperature indicator cum controller. This temperature controller can control the temperature from 50 C to 400 C with 5 C accuracy. A suitable thermocouple is introduced inside the oven to measure the temperature.

A control panel is provided on right side of the oven. It contains contactors, MCBs for mains, fans and heaters, digital temperature indicator/controller, digital timer 0-999 min., relays and other required items.

COSMIC ovens in series - LCO works on 440 Volts, 50 hz, 3 phase, A.C, supply.

Smaller ovens are fully assembled and can be transported as a single unit. Bigger ovens are demountable type. All six sides can be separated for transportation and re-assembled in your factory.

These ovens can be supplied with trolley, made of mild steel stock or with trays, made of mild-steel sheets. The number of trolleys/trays and size depends on a particular application.

Our expert advice is always available to suggest you the most suitable configuration.

Who else, than a Vacuum Metallising Plant manufacturer, making plants for more than 40 years, can design and fabricate an oven for metallising industry.