Parker Denison T6ED Cartridge Kits By Shashi Dhawal Hydraulics...

Featured Suppliers

How it works

Submit an enquiry to a product.
Wait for a call from nearest supplier from your area.
Get quote and product details.
Choose best from them.

Recently Added Suppliers

Product Description

Model Numbers:

T6ED

Higher Pressure

Pressure ratings to 4000 PSI reduce size and cost of actuators, valves and lines, give extended life at reduced pressures.

Better Efficiency

Better efficiency under load increases productivity, reduces heating and operating costs.

Mounting Flexibility

Up to 32 positions for double pumps and up to 128 for triple pumps: this reduces mounting costs and improves performance.

Lower Noise Levels

Increase operator safety and acceptance.

Complete Conformity

To SAE - J744c 2-bolt standards and to ISO 3019-1 (T6EDCS SAE E, T6EDCM ISO 3019/2) in the various keyed and splined shaft options offered.

Cartridge Design:

Provides for drop-in assemblies. This allows easy conversion or renewal of serviceable elements in minutes at minimum expense and risk of contamination. The "C" & "D" cartridge pumps are birotational and indicated by "B" description in cartridge model number. Pump rotation is easy to change by changing position of cam ring on port plate dowel pin hole.

Wider Range Of Acceptable Viscosities:

Viscosities from 9240 to 60 SUS permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. At high viscosity or cold temperature, the rotor to side plates gap is well lubricated and improves mechanical efficiency.

Fire Resistant Fluids:

Including phosphate esters, chlorinated hydrocarbons, water glycols and invert emulsions may be pumped at higher pressures and with longer service life by these pumps.

General Applications Instructions:

Check speed range, pressure, temperature, fluid quality, viscosity and pump rotation.
Check inlet conditions of the pump, if it can accept application requirement.
Type of shaft : if it would support operating torque.
Coupling must be chosen to minimize pump shaft load (weight, misalignment).
Filtration : must be adequate for lowest contamination level.
Environment of pump : to avoid noise reflection, pollution and shocks.

For more details please view the pdf file.