Process Pump by N.P. Syndicate

• Pumps are as per EN 22858 (DIN 24256) and ISO 2868. The design is of back pull out type. Large variety of models are available to operate at 1450 rpm and 2900 rpm at 50Hz/60Hz.
• Cuing: The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency. Normal design is for foot mounted pumps. Centre line mounting for special applications ate also available. Jacketed Casings are available for handling congealing liquid.
• Impeller: The impellers are of enclosed type and semi-open impellers can also be supplied. Hydraulic balancing of impellers is achieved when by back vanes or by balancing holes. The impellers are statically and dynamically balanced. Reliable fixing of the impeller on shaft is achieved by using helicon insert under impeller nut. To improve NPSH performance, inducer can be supplied.
• Shalt: The shaft is supported by two antifriction bearings to take residual axial thrust and prevent axial float or radial run 001.11 is fully protected from the liquid handled by means of a shalt sleeve and gaskets between impeller nut. impeller hub and shaft sleeve.
• Stuffing Box: The stuffing boa is sealed by gland packing or by cartridge type mechanical seal. Conversion from gland packing to mechanical seal is achieved by changing some standardised pant lie-machining of stuffing box is not necessary. Stuffing box cooling is provided for operating temperature 105°C for gland packed and 140°C for mechanical seal fitted pumps.
• Bearing: The bearings are oil lubricated. For high temperature (above 180°C) application, bearing oil cooling arrangement is provided. All pumps are provided with reinforced bearing arrangement as standard supply.
• Direction of Rotation: Clockwise viewed from driving end. 
• Drive: Puma. Can be driven by electric motor or engine. 
• Flanges: ANSI B 16.1. CL 125 flat Face : for CI/BR, ANSI I3 16.5. CL 150 Raised Face - for sp.melals viz. st.steel, cast steel etc, Drilling as per DIN, ASA, etc. (Optional)

Application:

• Air-Conditioning
• Condensate Extraction
• Distilleries
• Edible Oil, Sugar, Textile and Process Industries
• Water Treatment Plants