Propeller Pumps by Flow More Limited

Range Capacity : 30,000M3/hr Head :40 Mtrs Options

    • Surface or below ground discharge

    • Oil or water lubricated

    • Enclosed or open underground elbows

    • Regular, Bronze or stainless steel fitted impeller and other options.

    • Construction pull-out / non pull out

AXIAL - FLOW & MIXED - FLOW PUMPS

DISCHARGE SIZES : 200 to 1,800 MM UPTO 3,000 M3/Hr

If you're looking for PUMPING UNIT which will give outstanding performance of jobs such as drainage, food control and irrigation service, storm water disposal, moderate head or primary municipal pumping, dewatering of excavations coffer dams or dry docks, investigate FLOWMORE FIGURE PROPELLER PUMP. Designed especially for large capacity, moderate head pumping service.
DISCHARGE COLUMNThe heavy sheet steel discharge column support the pump bowls and serves as a discharge line.
PROPELLER :The propeller is secured firmly to the shaft by means of a key and locking collar. A sand collar prevents the entrance of sand and grit. Features a most desirable combination of proper airfol design, correct balance and smooth finish. Gives excellent performance. Available in SS Bronze, cast-iron, alloys and other material commercially available.
SUCTION BOWL:
Designed with a wide belled suction opening to permit unimpeded water entrance, suction bowl is provided with streamlined entrance guide vanes.
SUCTION STRAINER :Foreign materials are prevented from entering the pump by a heavy galvanized strainer. It is rigidly constructed for long life..LINE-SHAFT : A specially alloy steel having high torsional strength is used in the line-shaft. Correct rotation of the shaft and propeller is assured at all times..DISCHARGE ELBOWS : The discharge elbow is made of heavy sheet steel with wided sections, designed for higher efficiency. NON-REVERSE-RATCHET : The unit normally incorporates the non reverse ratchet. This feature is positive assurance that the shaft cannot be unscrewed by accidental phase reversal, and avoids undue stress caused by motor starting at time of shaft reversal.DRIVER : Vertical propeller Pumps may be arranged for electric motor, (either solid or hollow shaft), diesel or gasoline engines may be accomplished through suitable right angle-geares or belts. SHAFT TUBE : Steel shaft tube enclose the line shaft from the top of the pump bowl through the base-palte. It is held rigidly in position by shaft tube tension nut which bears against the upper surface of the base-plate. A shaft tube cap is tapped for lubricating oil connection. Properly spaced guide bearings with in the shaft tube assures smooth and vibrationless operation.
COLUMN BEARING : Water lubricated rubber bearings have been an outstanding feature of FLOWMORE Pumps for half-a-century. FLOWMORE engineered bearings assure smooth operation, long life, and enduring economy. Anything short of above features in rubber bearing construction is merely a make-shift bearing substitution.PROPELLER SHAFT : The stainless steel propeller shaft is designed with extra length to ensure permanent shaft alignment properly engineered water lubricated rubber bearings are provided in the pump bowls.PACKAGING BOX: The packing-box is readily accessible at the surface in case of re-packing and servicing LUBRICATION : The upper pump bearing and all the line-shaft bearings receive lubricant from an oiler Solenoid oilers are provided for automatic lubrication. Oil enters the top of the shaft tube and flows downward by gravity,