NDE Flaw Technologies Private Limited Manufacturer

ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we.

Set of eight flat-bottom hole blocks used to determine the relationship between flaw size and echo a.

Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel dist.

.

.

.

.

.

.

.

.

.

.

.

.

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one .

Tubular Nodes Dihedral Angle 45 Main Pipe Segment 20” Dia. 20 to 25 mm WT& Branch 8” Dia.

Plate Ultrasonic Practical Exam flawed specimens. Geometry: 0.75" x 8" x 10" Flaws: 3, randomly plac.

.

.

.

.

.

.

.

.

.

.

.

.

For calibration of shear and longitudinal transducers, and for verification of shear wedge exit poin.

The miniature angle-beam block can be used to check the beam angle and exit point of the transducer..

NDE Flaw Technologies, Calibration blocks is an importantsupplementary material in the Ultrasonic te.

.

.

.

.

.

.

.

.

.

.

.

.

The miniature angle-beam block can be used to check the beam angle and exit point of the transducer..

IIW Block type 1 is used for calibration of shear and longitudinal transducers, and verification of .

.

.

.

.

.

.

.

.

.

.

.

.

Plate to Plate Butt Joint with 6 mmThick plate, 250 mm Long and 75 mmWide on Either Side of The Weld.

Plate to Plate T Joint With 6 mm Thick plate , 250 mm Long & 150 mm base and 100 mm Wide T inclu.

Plate to Plate T Joint With 6 mm Thick plate , 250 mm Long & 150 mm base and 100 mm Wide T including.

.

.

.

.

The bar provides for the calibration and certification of Magnetic Particle Inspection Yokes to.

Special magnetic 10lbs AC Weight Lift Calibration Test Bar with artificial flaw. Supplied with .

A tensile or creep test of a metal to determine the effect of a surface notch.Complies with MIL-STD-.

.

.

.

.

.

.

.

.

ApplicationDescriptionECTCommentsCondensersNonferromagnetic material Generally, thin tubes made.

ApplicationDescriptionIRISCommentsHeat ExchangersNonferromagnetic material Stainless steel, Cu/.

ApplicationDescriptionMFLCommentsHeat ExchangersMildly ferromagnetic material Duplex steel, SS4.

.

.

.

.

.

.

.

.

.

.

.

.

Heat Treatment can be defined as an operation or combination of operations, involving heating and co.

Heat Treatment can be defined as an operation or combination of operations, involving heating a.

Internal oil firing is an advanced method of stress relieving carried out by us has the following ad.

.

.

.

.

.

.

.

.

15mm SV Plate to Plate RT Flawed Specimens Geometry:Plate to Plate Single V Butt Weld 300 mm Long an.

20mm SV Plate to Plate RT Flawed Specimens Geometry:Plate to Plate Single V Butt Weld 300 mm Long an.

25mm SV Plate to Plate RT Flawed Specimens Geometry:Plate to Plate Single V Butt Weld 300 mm Long an.

.

.

.

.

.

.

.

.

.

.

.

.

Plate to Plate Butt joint With 6 mm Thick Plate, 250 mm Long & 75 mm Wide oneither Side including on.

Plate to Plate T Joint With 6 mm Thick plate, 250 mm Long & 150 mm base and 100 mmWide T including O.

Pipe To Pipe Butt joint 4” Dia. And 6 to 8mm WT with 100 mm Long Pipe on either Side of the we.

.

The Mini Phased Array Calibration Block A is used during the initial setup and calibration.

The Mini Phased Array Calibration Block A is used during the initial setup and calibration.

.

.

Step wedges are used for the calibration of X-Ray machines and evaluation of techniques. Also when a.

Plate to Plate Single V Butt Weld 300 mmLong and 150 mm Wide on Either Side ofThe Weld thickness Ran.

Plate to Plate Single V Butt Weld 300 mmLong and 150 mm Wide on Either Side ofThe Weld and Plate thi.

Plate to Plate Single V Butt Weld 300 mmLong and 150 mm Wide on Either Side ofThe Weld and Plate thi.

.

.

.

.

.

.

.

10 Step - Titanium (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thick.

10 Step 90/10 Copper Nickel (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps.

10 Step - 7075 Aluminum 2 - 20 mm (Metric 10A) 10 Step Calibration Block Metric 1 Type: The Metric 1.

.

.

.

.

.

.

.

.

.

.

.

.

Ultrasonic Inspection.

Ultrasonic Testing.

Magnetic Particle Inspection.

.

.

.

.

.

.

.

.

tandard NDT VT Flawed Specimens Kit.(Visual Testing) FDT VT Demonstration. 7 Plates, 3 Tee 25 Random.

Post Weld Heat Treatment.

NDT training.

.

Used for determining resolution and sensitivity capabilities and for producing area amplitude and di.

PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version) Geometry:Four (4) angled hol.

PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300m.

.

.

.

.

.

.

DSC Block Aluminum 7075 (Inch Version) AWS type DSC Block Distance, sensitivity, refracted angle and.

Tm220 high precision ultrasonic thickness gauge features:high accuracy and resolution up to 0.001mm .

Brinell Hardness Tester.

.

.

.

.

.

.

.

.

.

.

.

.

10 Step - 7075 Aluminum (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at .

5 Step 90/10 Copper Nickel 5-Step Calibration Block for thickness and linearity calibration Inch Ver.

Set of eight flat-bottom hole blocks used to determine the relationship between flaw size and echo a.

.

.

.

.

.

.

.

.

.

.

.

.

API RP-2X Kit. Geometry:Kit Contains 3 Specimens: (1) 90° "T" Connection (1) 45° "Y" Connect.

T Joint 15mm SV Pipe to Pipe UT Flawed Specimens ( As per BINDT PCN Classification Specimens ) Geome.

PAUT-Mini Phased Array Calibration Standard Block1018 Steel (Inch Version) Geometry:The blockinclude.

.

Induction Heating Machine 5KVA.

Auto Manual Control Box.

.

.

.

.

.

.

.